Product Details
Battery Charging Board Mini USB 1A ARDA120
Battery Charging Board Charger Module with Mini USB Interface (TP4056 1A Lipo)
Compatible with Arduino modules and boards
Description
TP4056 1A Lipo Battery Charging Board Charger Module Mini USB Interface
Module Details
| Description | Lipo battery charging board |
| Item NO. | TP4056 |
| Charging Method | linear charge |
| Charging Current | 1A Adjustable |
| Charge Accuracy | 1.5% |
| Input Voltage | 4.5V-5.5V |
| Full Charge Voltage | 4.2V |
| Charging Indicator | Blue light lit charge,red light lit full charge |
| Charging Input Interface | Mini USB |
| Working Temperature | -10°C to +85°C |
| Reverse | NO |
| Usage | Used for single lipo or multi-section lipo parallel charging,can take power from the USB port. |
Current Regulation
| R(K) | I(mA) |
| 30 | 50 |
| 20 | 70 |
| 10 | 130 |
| 5 | 250 |
| 4 | 300 |
| 3 | 400 |
| 2 | 580 |
| 1.66 | 690 |
| 1.5 | 780 |
| 1.33 | 900 |
| 1.2 | 1000 |
Note: If the output reverse connection is inverse on the battery end, that will cause a short-circuit and will destroy the chip. The ammeter can only be series connected to the 5V input end. Charging current better to be 0.37 times of the battery capacity. Charging wires can’t be too thin or too long. Always make sure that the board is properly connected to the battery. The chip can work around 60 degrees without any problems.
Additional information
| Weight | 1.8 g |
|---|---|
| Dimensions | 25 × 19 × 10 mm |
